China Belt Conveyor Drive Drum Pulley for Mining/Cement Plant/Power Plant/Port Transport pulley system

Merchandise Description

 

Product Description

Conveyor  pulley can be divided into drive pulley (head pulley) and switch about pulley (tail pulley), drive pulley is the main part for transmitting the power : clean surface area and rubber area, and rubber surface area can be categorised into clean rubber surface, herringbone rubber surface and CZPT rubber area to meet up with distinct technological needs. Averting pulley can be categorized into smooth rubber surface and easy metal surface.
 
In accordance to the composition fashion, the 2 sort pulley can be divided into 3 light responsibility, medium duty and heavy obligation.
All the pulley adopt integrated bearing housing which is lubricated and crammed with grease and has 2 kinds: iron casting and steel casting, the shaft is made of 45#steel, the shell adopt weld assembly.
 
Conveyor travel pulley Based on the above layout, the pulley is moderately structured, handy kind chosen, efficiency reliable, long lifespan
Conveyor drive pulley  are of secure composition, very good overall performance and extended running existence. They can work normally in dusty, moist and muddy atmosphere.
 
Turning Pulley.
The turning pulley is used for altering the route of the belt operating or growing the wrap angle amongst the conveyor belt and the driving pulley .As for each different carrying capacities,the bend pulley can be divided into 3 calegories:mild duty,medium duty and large responsibility.The pulley which is employed for extending the speak to surface area,is usualy utilized for below or equal to forty five degree bending.The area treatment of the bend pulley can be clean metal surface area and flat rubber lagging
 

Thorough Photographs

create facility

Item Parameters

drive pulley specialized information
Variety Belt width(mm) Standard Diameter(mm) Size(mm)
Drive Pulley           five hundred 500 Length of the pulley depends on the belt width of the conveyor 
650 five hundred~630
800 630~one thousand
one thousand 800~1150
1200 800~1150
1400 a thousand~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend Pully           500 250~500
650 250~630
800 250~1000
one thousand 250~1600
1200 250~1600
1400 315~1600
1600 four hundred~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600

Packaging & Shipping

Company Profile

HangZhou Port Shipbuilding & Machinery Industry Co., Ltd (RPIC) are a extensive group enterprise which is engaged in the design, manufacture, set up and upkeep of port bulk-dealing with tools. Our business has the 3rd-stage Qualification of Equipment & Electrical Equipment Installation Business and 1st-Level Qualification of Products Upkeep Company. Our firm has currently handed ISO9002: 2000, ISO14001 and OHSMS18001 system certification.

The organization of our firm addresses the layout, manufacture, set up and servicing of metal construction tasks, belt conveyor program projects, port auxiliary equipment, port dealing with equipment and their components. The main items of our company contain traveling stackers, managing mechanisms of portal cranes, belt conveyors, idler rollers, pulleys, grabs and many others.

The goods and solutions of HangZhou Port Device Engineering Co., Ltd. Spread all above domestic and abroad port market, electrical energy business, metallurgy sector, strength market, cement market, foodstuff market, paper business, and many others.
With skilled complex groups, beautiful processing equipment, present day management methods and hassle-free transportation, our company adheres to the enterprise philosophy of “integrity and innovation, working hard to manufacture higher top quality items and constructe superb assignments, supplying clients with benefit-added services”.

The top quality control is carried out through the total generation method. We go after perfection in the design and style and creation of every merchandise. With superior processing equipment, we are fully commited to supplying excellent top quality merchandise and services.

RPIC is a top expert bulk content conveying technique tools supplier. The potential of conveying tools can get to 10, 000t/h.

RPIC is a skilled gear set up and servicing provider service provider which has the First-degree Qualification of the Gear Upkeep Enterprise.

Our items are properly sold to Europe, Australia, The us, Asia and African.

We welcome all firms to speak to us for business negotiation

Our Positive aspects

Gain of Push Pulley

* Drive pulley is the main ingredient of the belt conveyor transmission power, its way to generate the belt conveyor is with one pulley, double-pulley and multi-pulley.
* Pulley operation is steady, with trustworthy quality, servicing-cost-free.
* The style of pulley should totally take into account the pressure condition at all details.
* Pulley composition need to be in accordance with the pressure to use distinct structural layout and manufacturing.

Edge of Bend Pulley

* Bend pulley is mostly utilised to adjust the course of the conveyor belt or to push the conveyor belt to increase the angle with the generate pulley.
* Bend pulley is outfitted with a compact framework, light-weight bodyweight, low occupancy, reliable overall performance, lovely visual appeal with safe and convenient use.
* It can nevertheless operate appropriately in huge dust, soaked mud and other severe conditions.
 
 

productive situations

our certification

FAQ

one.Q: Your bearing sort and manufacturer generally use?
 A: Large clearance C3 ZZ sort deep ball bearing with LYC, NSK, SKF,FAG  etc. In accordance to customer’s specifications.
two.Q: How is your Payment Phrase?
A: T/T or L/C. One more payment time period we can also talk about.
3.Q: Can you personalize it?
A: We support customization in accordance to your ask for.
four.Q: What’s the MOQ?
A: 1 piece.
5.Q: What’s the manufacturing capability of your pulley and belt conveyor? 
A: pulley  1,000 pcs/yr.
6.Q: What’s your pulley’s lifespan?
A: Our pulleys have a extended lifespan with very good functionality and usually make confident 30000 to 50000 hrs below the regular web site and operation.

To Be Negotiated 1 Piece
(Min. Order)

###

Material: Steel
Application: Chemical Industry, Grain Transportation, Mining Transport, Power Plant
Bearing Type: Double Sealed Bearing
Pulley Diameter: 250mm to 2400mm
Pulley Tube: Q235 Carbon Steel
Shaft: Q235 Carbon Steel, 45# Steel(GB) Equal to C45

###

Customization:
Available

|


###

drive pulley technical data
Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive Pulley           500 500 Length of the pulley depends on the belt width of the conveyor 
650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend Pully           500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600
To Be Negotiated 1 Piece
(Min. Order)

###

Material: Steel
Application: Chemical Industry, Grain Transportation, Mining Transport, Power Plant
Bearing Type: Double Sealed Bearing
Pulley Diameter: 250mm to 2400mm
Pulley Tube: Q235 Carbon Steel
Shaft: Q235 Carbon Steel, 45# Steel(GB) Equal to C45

###

Customization:
Available

|


###

drive pulley technical data
Type Belt width(mm) Standard Diameter(mm) Length(mm)
Drive Pulley           500 500 Length of the pulley depends on the belt width of the conveyor 
650 500~630
800 630~1000
1000 800~1150
1200 800~1150
1400 1000~1350
1600 1150~1600
1800 1150~1800
2000 1350~2000
2200 1600~2200
2400 1800~2400
Bend Pully           500 250~500
650 250~630
800 250~1000
1000 250~1600
1200 250~1600
1400 315~1600
1600 400~1600
1800 400~1600
2000 500~1600
2200 630~1600
2400 800~1600

How to Assemble a Pulley System

A pulley is a wheel that rotates on a shaft or shaft to support the movement of a taut cable. Pulleys allow power to be transmitted from the shaft to the cable.
pulley

Simple pulley

The simplest theory of operation of a pulley system assumes that the rope and weight are weightless and that the rope and pulley are not stretched. Since the force on the pulley is the same, the force on the pulley shaft must also be zero. Therefore, the force exerted on the pulley shaft is also distributed evenly between the two wires passing through the pulley. The force distribution is shown in Figure 1.
The use of simple pulleys is as old as history. Before the Industrial Revolution, people relied on muscle strength to carry heavy loads. Pulleys, levers and ramps make this possible. Today, we can see pulleys in a variety of systems, from exercise equipment to garage doors, and even rock climbers use them to help them reach greater heights. As you can see, these simple machines have been around for centuries and are used in everyday life.
Another simple pulley system is the pulley system. In this system, there is a fixed pulley at the top and a movable pulley at the bottom. The two pulleys are connected by a rope. This combination reduces the amount of work required to lift the load. Additionally, the ropes used in this system are usually made of rope and woven through the individual wheels of the pulley drum.
A pulley is an ingenious device that distributes weight evenly and can be used to lift heavy objects. It is easy to build and can be easily modified for a wide range of activities. Even young children can make their own with very few materials. You can also use simple household items such as washing machines, thin textbooks and even chopsticks. It’s very useful and can be a great addition to your child’s science and engineering activities.
The simplest pulley system is movable. The axis of the movable pulley can move freely in space. The load is attached to one end of the pulley and the other end to the stationary object. By applying force on the other end of the rope, the load is lifted. The force at the other end of the rope is equal to the force at the free end of the pulley.
Another form of pulley is the compound pulley. Compound pulleys use two or more wheels to transmit force. Compound pulleys have two or more wheels and can lift heavier objects. Dim is POLE2.
pulley

tapered pulley

It is important to clean and align the bolt holes before assembling the tapered pulley. The screws should be lubricated and the threads cleaned before installation. To install the pulley, insert it into the shaft keyway. The keyway should be aligned with the shaft hole to prevent foreign matter from entering the pulley. Then, alternately tighten the bolts until the pulley is tightened to the desired torque.
A tapered pulley is a basic structure. The pulley belt is arranged across four steps. Installed between the headstock casting and the main shaft, it is often used in the paper industry. It integrates with printing machinery and supports assembly lines. These pulleys are also available in metric range options, eliminating the need for ke-waying or re-drilling. They are easy to install, and users can even customize them to suit their needs.
CZPT Private Limited is a company that provides unique products for various industries. This large product is used for many different purposes. Also, it is manufactured for industrial use. The company’s website provides detailed specifications for the product. If you need a tapered pulley, contact a company in your area today to purchase a quality product!
Tapered pulleys are vital to paper mill machinery. Its special design and construction enable it to transmit power from the engine source to the drive components. The advantages of this pulley include low maintenance costs and high mechanical strength. Cone wheel diameters range from 10 inches to 74 inches. These pulleys are commonly used in paper mills as they offer low maintenance, high mechanical strength and low wear.
A tapered sleeve connects the pulley to the shaft and forms an interference fit connector. The taper sleeve is fixed on the shaft with a key, and the corresponding inner hole is fixed on the shaft with a key. These features transmit torque and force to the pulley through friction. This allows the tapered pulley to move in a circular motion. The torque transfer characteristics of this pulley are most effective in high speed applications.
The sleeve is the most important part when assembling the tapered pulley. There is an 8-degree taper inside the cone, which is closely connected to the inner surface of the pulley. Taper sleeves and pulleys are interchangeable. However, tapered pulleys can be damaged after prolonged use.
pulley

pulley pulley system

A pulley pulley system is a great way to move heavy objects. These systems have been around for centuries, dating back to the ancient Greeks. This simple mechanism enables a person to lift heavy objects. These blocks are usually made of rope, and the number of turns varies for different types of rope. Some blocks have more cords than others, which creates friction and interferes with the easy movement of the lifting system.
When using a pulley pulley, the first thing to decide is which direction to pull. Unfavorable rigging means pulling in the opposite direction. In theory, this method is less efficient, but sometimes requires a certain amount of work space. The benefit is that you will increase the mechanical advantage of the pulley by pulling in the opposite direction. So the interception and tackle system will give you more of a mechanical advantage.
Pulley pulleys are an excellent choice for lifting heavy objects. The system is simple to install and users can easily lift objects without extensive training. Figure 3.40 shows a pulley in action. In this photo, the person on the left is pulling a rope and tying the end of the rope to a weight. When the rope is attached to the load, the rope will be pulled over the pulley and pulley.
The blocks on the blocks are attached to the ends of the rope. This creates unique lifting advantages compared to single-line systems. In Figure 3, the tension of each thread is equal to one-third of the unit weight. When the rope is pulled over the pulley, the force is divided equally between the two wires. The other pulley reverses the direction of the force, but that doesn’t add any advantage.
Use pulleys to reduce traction and load. The weight of the load has not changed, but the length of the rope has increased. Using this method, lifting the load by pulling the rope four times reduces the force required to lift one foot. Likewise, if the pulley system had four pulleys instead of three, the length of the rope would be tripled.
The system can transmit loads in any direction. Rope length is determined by multiplying the distance from the fixed block to the load by the mechanical advantage. If the mechanical advantage is 3:1, then passing the rope through the pulley 3 times will produce the required traction distance. Also, the length of the rope will depend on the mechanical advantage, so if the load is three times the length of the rope, it will be more than three times the required length.

China Belt Conveyor Drive Drum Pulley for Mining/Cement Plant/Power Plant/Port Transport     pulley system	China Belt Conveyor Drive Drum Pulley for Mining/Cement Plant/Power Plant/Port Transport     pulley system
editor by CX 2023-04-03

Stainless Pulley

As one of the leading stainless pulley manufacturers, suppliers, and exporters of mechanical products, We offer stainless pulley and many other products.

Please contact us for details.

Manufacturer supplier exporter of a stainless pulley.

Recent Posts